chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 1 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high stability resistor chips (< 0.25 % at pn at 70 c during 1000 h) thick film technology vishay sfernice thick film resistor chips are specially designed to meet ve ry stringent specifications in terms of reliability, stability < 0.25 % at pn at + 70 c during 1000 h, homogeneity, reproducibility and quality. they conform to specifications nfc 83-240 and mil-r-55342 d. evaluated to escc 4001/026 (see chphr datasheet). sputtered thin film termination s, with nickel barrier, are very convenient for high operating conditions. they can withstand thousands of very severe thermal shocks. b (w/a), n (w/a), and f (one fa ce) types are for solder reflow assembly. g (w/a) and w (one face) types are for wire bonding, gluing and even high tempera ture solder reflow. features ? chp: standard passivated version for industrial, professional an d military applications ? robust terminations ? large ohmic value range 0.1 ? to 100 m ? ? tight tolerance to 0.5 % ? HCHP: for high frequency applications ? escc approved see chphr ? high temperature (245 c) see chpht ? smd wraparound chip resistor ? halogen-free according to iec 61249-2-21 definition ? withstand moisture resi stance test of aec-q200 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. notes (1) shall be read in conjunc tion with other tables. (2) model chp0805 being same size than case 0705 with same performances, only codification of chp0805 remains. (3) with special assembly care. available available standard electrical specifications model size rated power pn w limiting element voltage v max. overload voltage v resistance range (1) ? tolerance % temperature coefficient ppm/c unit weight mg chp0502 ? HCHP0502 0502 0.050 50 100 0.1 to 25m 0.5, 1, 2, 5 100, 200 1 chp0505 ? HCHP0505 0505 0.125 50 100 0.1 to 10m 0.5, 1, 2, 5 100, 200 3 chp0603 ? HCHP0603 0603 0.125 50 100 0.1 to 25m 0.5, 1, 2, 5 100, 200 2 chp0805 (2) ? HCHP0805 0805 0.200 150 300 0.1 to 25m 0.5, 1, 2, 5 100, 200 4 chp1005 ? HCHP1005 1005 0.250 150 300 0.1 to 50m 0.5, 1, 2, 5 100, 200 5 chp1206 ? HCHP1206 1206 0.250 200 400 0.1 to 50m 0.5, 1, 2, 5 100, 200 8 chp1505 ? HCHP1505 1505 0.500 200 400 0.1 to 75m 0.5, 1, 2, 5 100, 200 8 chp2010 ? HCHP2010 2010 1.000 (3) 200 400 0.1 to 100m 0.5, 1, 2, 5 100, 200 26 chp1020 ? HCHP1020 1020 1.000 (3) 200 400 0.1 to 10m 0.5, 1, 2, 5 100, 200 25 chp2208 ? HCHP2208 2208 0.750 200 400 0.1 to 100m 0.5, 1, 2, 5 100, 200 21 chp2512 ? chp2512 2512 2.000 (3) 250 500 0.1 to 100m 0.5, 1, 2, 5 100, 200 42 chp1010 ? chp1010 1010 0.500 200 400 0.1 to 25m 0.5, 1, 2, 5 100, 200 12
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 2 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters (inches) case ? size abcd/e value tol. value tol. value tol. value tol. 0502 1.27 (0.050) 0.152 (0.006) 0.60 (0.024) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0505 1.27 (0.050) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0603 1.52 (0.060) 0.152 (0.006) 0.85 (0.033) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 0805 1.91 (0.075) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1005 2.54 (0.100) 0.152 (0.006) 1.27 (0.050) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1206 3.05 (0.120) 0.152 (0.006) 1.70(0.067) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1505 3.81 (0.150) 0.152 (0.006) 1.32 (0.052) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2010 5.08 (0.200) 0.152 (0.006) 2.54 (0.100) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1020 2.54 (0.100) 0.152 (0.006) 5.08 (0.200) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2208 5.58 (0.220) 0.152 (0.006) 2.00 (0.079) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 2512 6.35 (0.250) 0.152 (0.006) 3.30 (0.130) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) 1010 2.54 (0.100) 0.152 (0.006) 2.54 (0.100) 0.127 (0.005) 0.5 (0.020) 0.127 (0.005) 0.38 (0.015) 0.127 (0.005) suggested land pattern (to ipc-7351a) case size dimension in mm (inches) zmax. gmin. xmax. 0502 1.82 (0.072) 0.10 (0.004) 0.73 (0.029) 0505 1.82 (0.072) 0.10 (0.004) 1.40 (0.055) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.038) 0805 2.76 (0.109) 0.74 (0.029) 1.40 (0.055) 1005 3.39 (0.134) 1.37 (0.054) 1.40 (0.055) 1206 3.90 (0.154) 1.88 (0.074) 1.73 (0.068) 1505 4.66 (0.184) 2.64 (0.104) 1.45 (0.057) 2010 5.93 (0.234) 3.91 (0.154) 2.67 (0.105) 1020 3.39 (0.134) 1.37 (0.054) 5.21 (0.205) 2208 6.43 (0.253) 4.41 (0.174) 2.04 (0.080) 2512 7.20 (0.284) 5.18 (0.204) 3.19 (0.125) 1010 3.39 (0.134) 1.37 (0.054) 2.67 (0.105) a d d c a d d c e e b g min. z max. x max.
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 3 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? refer to application note guidelines for vishay sfernice resistive and inductive components (document number: 52029) for recommended reflow prof ile. profile #3 applies. note ? for temperature up to 215 c please consult vi shay sfernice note (1) improved pe rformance on request chips for high frequency applications the hf performance of flip chip and w/a types can be improved on request. ? please ask for HCHP power derating curve packaging esd packaging available: waffle pack and plastic tape and reel (low conductivity). pape r tapes available on request (esd only). packaging rules waffle pack can be filled up to maximum qu antity indicated in the table here above, taking into account the minimum order quantity. when quantity ordered exce eds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. to get not stacked up waffle pack in case of ordered quantity > maximum number of pieces per package: please consult vish ay sfernice for sp ecific ordering code tape and reel see part numbering information to get the quantity desired by tape. mechanical specifications substrate alumina technology thick film (ruthenium oxyde) protection epoxy coating terminations b (w/a): snpb over nickel barrier for solder reflow n (w/a): snag over nickel barrier for solder reflow f (flip chip): snag over nickel barrier for solder reflow w (one face) and g (w/a) type: gold over nickel barrier for other applications climatic specifications operating temperature ? range - 55 c; + 155 c best tol. and tcr vs. ohmic value (1) ohmic value ? range in ? tightest tolerance (%) best tcr (ppm/c) 10 ? < r < 5m 0.5 % (d) 100 (k) 5 ? < r < 10m 1 % (f) 100 (k) 1 ? < r < r max. 2 % (g) 200 (l) 0.1 ? < r < r max. 5 % (j) 200 (l) size moq number of pieces per tape width waffle pack tape and min. max. 0502 100 400 100 4000 8 mm 0505 100 0603 5000 0805 ? 4000 1005 221 1206 140 1505 60 2010 2000 8 mm 1010 100 2500 8 mm 2208 60 4000 8 mm 1020 60 1000 8 mm 2512 50 2000 8 mm 070 20 40 60 80 100 120 140 155 0 20 40 60 80 100 ambient temperature in c rated power ( % )
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 4 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical hf performance of HCHP popular options for any option it is recommended to cons ult vishay sfernice for availability first. option: enlarged terminations: 0063 ? for stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joi nt can be reduced using enlarged te rminations chip resistors which are soldered on large and thick copper pads acting as heat sinks (see application note: 53048 power dissipation in high precis ion vishay sfernice chip resistors and arrays (p thin film, pra arrays, chp thick film) www.vishay.com/doc?53048 . option to order: 0063 (applies to size 1206/1505/1020/2010/2512). 2.0 1.6 1.8 1.2 1.4 1.0 0.8 0.6 0.4 0.2 0 1 10 100 1000 10 000 f (mhz) |z|/r size 0603 (w/a) 100 k 1 m 1 k 10 k 100 200 1 10 2.0 1.6 1.8 1.2 1.4 1.0 0.8 0.6 0.4 0.2 0 1 10 100 1000 10 000 f (mhz) |z|/r size 0603 (flip chip) 100 k 1 m 1 k 10 k 100 200 1 10 dimensions (option 0063) in millimeters case ? size abcde 0.152 0.127 0.127 0.127 0.127 1206 3.00 1.73 0.38 0.40 1.19 1505 3.70 1.25 0.50 0.50 1.54 2010 5.03 2.64 0.50 0.50 2.20 1020 2.49 5.18 0.50 0.31 0.93 2208 5.53 2.05 0.50 0.50 2.45 2512 6.30 3.30 0.50 0.50 2.84 b e d enlarged termination uncoated ceramic bottom view for mountin g a c
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 5 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 option: marking option to order 0013: marking of ohmic va lue and tolerance: sizes: 0805 to 1005: 3 digits marking (according to eia-96) ? sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) tolerance indicated by a color dot. option to order 0014: marking of ohmic value: sizes 0805 to 1005: 3 digits marking (according to eia-96) ? sizes 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) no standard marking avai lable for smaller sizes. a price adder will apply to the unit price of the parts for options 0013 and 0014. suggested land pattern (option 0063) case size dimensions (in millimeters) z max. g min. x max. 1206 3.85 0.50 1.86 1505 4.55 0.50 1.38 2010 5.88 0.50 2.77 1020 3.34 0.50 5.31 2208 6.38 0.50 2.18 2512 7.15 0.50 3.43 performance tests conditions requirements typical values and drifts termination adhesion 5n for 10 s (0.25 % + 0.05 ? ) < 0.1 % resistance to solder heat immersion 10 s in sn/pb 60/40 at + 260 c (0.25 % + 0.05 ? ) < 0.1 % rapid temperature change 5 cycles (0.25 % + 0.05 ? ) < 0.1 % - 55 c + 155 c climatic sequence phase a dry heat phase b damp heat phase c cold - 55 c phase d damp heat 5 cycles (1 % + 0.05 ? ) < 0.2 % humidity (steady state) 56 days (1 % + 0.05 ? ) < 0.2 % moisture resistance aec-q200 85 c/85 % rh/pn/10 1000 h 5 % + 0.05 ? max. < 3 % + 0.05 ? short time overload 6.25 pr for 2 s (0.25 % + 0.05 ? ) < 0.1 % load life 1000 h at rated power 90/30 at + 70 c 1000 h (1 % + 0.05 ? ) 1000 h < 0.25 % 2000 h < 0.5 % 10 000 h < 1 % g min. z max. x max.
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 6 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) one should use the 3 curves togeth er to get the right performances. maximum permissible pulse load p i max. for single pulse (1) energy for single pulse (1) maximum permissible pulse voltage u i max. single pulse (1) chp0402 chp0603 chp0805 chp1206 chp2010 chp2512 0.1 1 10 100 pul s e duration t ( s ) permi ss ible pul s e power p (w) 0.00001 0.0001 0.001 0.01 0.1 1 10 0.0001 0.001 10 1 0.1 100 pul s e duration t ( s ) permi ss ible pul s e energy (j) 0.00001 0.0001 0.001 0.01 0.1 1 10 chp0402 chp0603 chp0805 chp1206 chp2010 chp2512 0.01 0.0001 10 100 1000 10 000 pul s e duration t ( s ) permi ss ible pul s e voltage (v) 0.00001 0.0001 0.001 0.01 0.1 1 10 chp0402 chp0603 chp0805 chp1206 chp2010 chp2512
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 7 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 maximum permissible pulse load p i max. 1.2/50 s lightning surge 10/700 s lightning surge 0.1 1 10 100 pul s e duration t ( s ) permi ss ible pul s e power p (w) 0.00001 0.0001 0.001 0.01 0.1 1 10 chp0402 chp0603 chp0805 chp1206 chp2010 chp2512 10 100 1000 10 000 re s i s tor value ( ) te s t voltage (v) 10 100 1000 10 000 100 000 chp0603 chp0805 chp1206 chp2010 chp2512 10 100 1000 10 000 re s i s tor value ( ) te s t voltage (v) 10 100 1000 10 000 100 000 chp0603 chp0805 chp1206 chp2010 chp2512
chp, HCHP www.vishay.com vishay sfernice revision: 19-may-14 8 document number: 52023 for technical questions, contact: sferthinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? historical part numbers ar e not recommended but can st ill be used for ordering. (1) for paper tape please co nsult vishay sfernice. global part number information limited to 18 digits: if more digits are necessary a cofication of some digits might be necessary global model size tcr value tolerance termination packaging (1) option chp HCHP (3 or 4 digits) 0502 0505 0603 0805 1005 1206 1505 2010 1020 1010 2208 2512 k = 100 ppm l = 200 ppm the first 3 digits are significant figures and the last digit specifies the number of zeros to follow. r designates decimal point 10r0 = 10 ? 3901 = 3900 ? 1004 = 1 m ? d = 0.5 % f = 1 % g = 2 % j = 5 % b : snpb over nickel barrier ? n : snag over nickel barrier ? f : snag over nickel barrier (one face) ? g : gold over nickel barrier ? w : gold over nickel barrier (one face) for more information see codification of packaging table from 1 to 3 digits, leave blank if no option b : lead bearing version ? n and g : lead (pb)-free/ ? rohs version historical part number examples: chp2010k50r0fbt100 (tapes of 100 pieces) chp0805k33r0fg0045 (chp option 45) HCHP0805k16r5fbt55 (HCHP option 55) chp2010l1006jn (waffle pack) codification of packaging waffle pack w 100 min., 1 mult wa 100 min., 100 mult (avail able only in size 1206) plastic tape t 100 min., 1 mult ta 100 min., 100 mult tb 250 min., 250 mult tc 500 min., 500 mult td 1000 min., 1000 mult te 2500 min., 2500 mult tf full tape (quantity depending on size of chips) paper tape pt 100 min., 1 mult pa 100 min., 100 mult pb 250 min., 250 mult pc 500 min., 500 mult pd 1000 min., 1000 mult pe 2500 min., 2500 mult pf full tape (quantity depending on size of chips) codification of options on two digits option option 2 digits option option 2 digits .. .. 0126 1a 0099 99 0127 1b 0100 0a 0128 1c 0101 0b .. .. 0102 0c 0320 8m 0103 0d 0321 8n 0104 0e 0322 8o 0105 0f 0323 8p .. .. 0324 8q 0124 0y 0325 8r 0125 0z .. .. codification of sizes code 18 code 40 code 18 code 40 7 02016 m 22 8 0302 n 33 9 0402 o 44 a 0502 p 55 b 0505 q 515 c 0603 r 48 d 0805 s 408 e 1005 t 816 f 1010 u 914 g 1020 v 073 h 1206 w 074 i 1505 x 100 j 2010 y 135 k 2208 z 182 l 2512 hp 0805k1 c 00 1fb t99 9
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
